🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore

Bentonite | Volclay KWK Krystal Klear

Product image 1

Bentonite | Volclay KWK Krystal Klear

Bentonite | Volclay KWK Krystal Klear

Volclay KWK Krystal Klear Bentonite is a clay-like mineral with a negative charge that, similar to Sparkolloid, removes positively charged particles. It is most effective when the wine is at a warmer temperature, so we recommend using it for fining in late spring or early summer. It also works better at lower pH levels because proteins have a stronger positive charge in more acidic conditions.

Generic Low-Level Fining for 5 Gallons:

  • Blend 1/2 tsp (about 3g) of bentonite with 1/2 cup of hot water (140 to 200°F) in a blender for 1-2 minutes.
  • Let the mixture sit for 60 minutes, then stir it well before adding it to the wine.
  • Allow the wine to stand for 10-14 days before racking off.
  • This method achieves a fining rate of 0.16g/L.

Generic Mid-Level Fining:

  • Follow the same steps as above but use 9 grams of bentonite and 3/4 cup of hot water.
  • This method achieves a fining rate of 0.5g/L.

More Scientific Approach:

  • You can create a 5% bentonite stock solution and run bench trials to determine the lowest effective concentration for clearing the wine.
  • Since fining is non-selective, it removes both undesirable particles like yeast and some desirable phenolic compounds. Therefore, it's best to use the lowest effective concentration.
  • To make a 5% solution, dissolve 50 grams of bentonite in 850ml of hot water, mix thoroughly, and top up with water to a final volume of 1L.
  • Set up trials with clear jars of equal volume, adding varying amounts of the solution to achieve addition rates between 0.3g/L and 2.0g/L. You’ll need to do some calculations to determine the right amount for your needs.
  • Let the trials clear overnight. For more detailed technical information, consult BK653 - Monitoring the Winemaking Process from Grapes to Wine - Techniques & Concepts.

Fining with Wine Kits:

  • When using a wine kit made from concentrate, bentonite is typically added on the first day for a few reasons.
    • It serves as a nucleation site for CO2 removal.
    • The CO2 movement helps distribute the bentonite throughout the wine, allowing you to use less and achieve effective fining in a shorter time.

Select Measurement
From $0.70

Original: $1.99

-65%
Bentonite | Volclay KWK Krystal Klear

$1.99

$0.70

Product Information

Shipping & Returns

Description

Volclay KWK Krystal Klear Bentonite is a clay-like mineral with a negative charge that, similar to Sparkolloid, removes positively charged particles. It is most effective when the wine is at a warmer temperature, so we recommend using it for fining in late spring or early summer. It also works better at lower pH levels because proteins have a stronger positive charge in more acidic conditions.

Generic Low-Level Fining for 5 Gallons:

  • Blend 1/2 tsp (about 3g) of bentonite with 1/2 cup of hot water (140 to 200°F) in a blender for 1-2 minutes.
  • Let the mixture sit for 60 minutes, then stir it well before adding it to the wine.
  • Allow the wine to stand for 10-14 days before racking off.
  • This method achieves a fining rate of 0.16g/L.

Generic Mid-Level Fining:

  • Follow the same steps as above but use 9 grams of bentonite and 3/4 cup of hot water.
  • This method achieves a fining rate of 0.5g/L.

More Scientific Approach:

  • You can create a 5% bentonite stock solution and run bench trials to determine the lowest effective concentration for clearing the wine.
  • Since fining is non-selective, it removes both undesirable particles like yeast and some desirable phenolic compounds. Therefore, it's best to use the lowest effective concentration.
  • To make a 5% solution, dissolve 50 grams of bentonite in 850ml of hot water, mix thoroughly, and top up with water to a final volume of 1L.
  • Set up trials with clear jars of equal volume, adding varying amounts of the solution to achieve addition rates between 0.3g/L and 2.0g/L. You’ll need to do some calculations to determine the right amount for your needs.
  • Let the trials clear overnight. For more detailed technical information, consult BK653 - Monitoring the Winemaking Process from Grapes to Wine - Techniques & Concepts.

Fining with Wine Kits:

  • When using a wine kit made from concentrate, bentonite is typically added on the first day for a few reasons.
    • It serves as a nucleation site for CO2 removal.
    • The CO2 movement helps distribute the bentonite throughout the wine, allowing you to use less and achieve effective fining in a shorter time.

You may also like

NEW
Thumbnail 1

ProRestart Uvaferm 43 Encapsulated Wine Yeast - (83 g) & 1 mesh bag

$54.99

-65%NEW
Thumbnail 1

Plastic Hose Barb - 1/2 in. x 1/2 in. FPT

$5.49

$1.92

-65%NEW
Thumbnail 1

Indicator Solution for Aeration-Oxidation Free SO2 Test - 1 oz

$11.99

$4.20

-65%NEW
Thumbnail 1

Economy Sulfur Burner

$51.99

$18.20

-65%NEW
Thumbnail 1Thumbnail 2

Inert Gas System for Variable Volume Tanks

$344.99

$120.75

-65%NEW
Thumbnail 1Thumbnail 2

Hop Mothra IPA by Jim Nielsen | 5 Gallon Beer Recipe Kit | Extract

$44.99

$15.75

-65%NEW
Thumbnail 1Thumbnail 2

Vienna Lager by John Palmer | 5 Gallon Beer Recipe Kit | All-Grain

$33.99

$11.90

NEW
Thumbnail 1

Replacement Screen for 12 Cup French Press

$13.99

-65%NEW
Thumbnail 1Thumbnail 2

Vienna Lager by John Palmer | 5 Gallon Beer Recipe Kit | Extract

$39.99

$14.00

-65%NEW
Thumbnail 1

Replacement Screen for 3 Cup French Press

$8.99

$3.15

NEW
Thumbnail 1

Replacement Screen for 8 Cup French Press

$8.99

NEW
Thumbnail 1

Replacement Gauge for WE398 Air Pump for Marchisio Variable Volume Tanks

$19.99